New here from CT

Here's my '43 Inland, the barrel is dated 11-43 and the frame is 29819xx.  It has a U. marked low-wood "I" stock (OI) and a Q-RMC handguard. Flip sights, push safety, flat bolt, and who knows what else.  I've had it for around 20 years and shot it several times.  I did recently fill out a data sheet and will send it in.

welcome to the forum from Tennessee! 

Welcome from Ohio!

Thanks for the welcome!  The file size for my above photos was too large (even when resized and compressed) for this site's built in hosting size limit of 500kb so I used imgur.  

Thank you for posting your Data Sheet.

I am anxious to see the additional pictures you plan on posting. I would recommend posting them in the "Carbines of the Collectors" sub forum with a link back to this thread. That way you won't need to move or repost the pictures in this thread.

I am particularly interested in seeing pictures of the rear sight (left side), mag catch markings, operating slide markings (inside bottom) and trigger housing detail (where hammer hits TH). Also, is the sear unmarked? If so, a picture would be interesting as well. Your DS notes several barrel proof marks including double "P" and a punch mark. More pictures please!   Also, your DS notes a later short chamber skirt, but I don't see barrel threads that are normally visible when the skirt is absent.   

Again, thank you for sharing!

Yes it looks to me like a long skirt barrel 

Yes, it has the added hole behind the trigger. That's just one of a few boxes that I've updated on the data sheet, not sure why it was incorrectly checked, as it's obviously there.