SG stock on a first production Inland?
Printed From: The Carbine Collector's Club
Category: The Club
Forum Name: General Discussion
Forum Description: Carbine Related
URL: http://www.uscarbinecal30.com/forum/forum_posts.asp?TID=6191
Printed Date: Apr 18 2024 at 11:22pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: SG stock on a first production Inland?
Posted By: DogDoc
Subject: SG stock on a first production Inland?
Date Posted: May 12 2022 at 11:04am
|
I’m looking at a very clean Inland at a local shop. It is very clean The cartouche is very nice but is SG. I can’t find any rework marks. Would some early Inland’s have Saginaw stocks? Thanks, Jay
|
Replies:
Posted By: Matt_X
Date Posted: May 12 2022 at 11:50am
|
Not with an SG acceptance stamp. That said, there is enough interest in legit SG and S'G' stocks that it wouldn't be too difficult to find a buyer for the stock or possibly a trade. Check the stock cut out for the sling to see what stampings are in there.
|
Posted By: W5USMC
Date Posted: May 12 2022 at 11:52am
|
As Matt said no, if that stock has a legit SG Cartouche that means it was originally on a carbine that was accepted by the Ordnance Dept from Saginaw Gear.
------------- Wayne USMC Retired NRA Life Member |
Posted By: DogDoc
Date Posted: May 12 2022 at 12:36pm
| I’ll double check but I believe it is RSG. I’m going to buy it. It’s real clean. |
Posted By: Matt_X
Date Posted: May 12 2022 at 12:54pm
|
We're still putting together info on SG stocks and their stampings. http://www.uscarbinecal30.com/forum/ruth-sg-stock-marked-oi-40a-found-oi-39a_topic5164.html" rel="nofollow - http://www.uscarbinecal30.com/forum/ruth-sg-stock-marked-oi-40a-found-oi-39a_topic5164.html
|
Posted By: painter777
Date Posted: May 12 2022 at 5:23pm
|
Doesn't help DogDoc, But thought I'd mention I have a Type II Hi-Wood with Distorted from sanding Inland CC. With RSG Stamped upside down and Serif I below it. Has the Green ink stamp in the channel. Came from a bulk purchase of stocks.    Charlie-Painter777
------------- Living Free because of those that serve..... |
Posted By: DogDoc
Date Posted: May 12 2022 at 8:59pm
|
Posted By: DogDoc
Date Posted: May 15 2022 at 9:47pm
|
I was finally able to get some pictures. The slide has no markings but appears to be consistent with Inland. The bolt has no markings. The trigger assembly is Inland. I’ll get a data sheet at some point. The Saginaw stock seems to be the only non-Inland component. No rebuild marks. |
Posted By: DogDoc
Date Posted: May 15 2022 at 9:48pm
|
Posted By: DogDoc
Date Posted: May 15 2022 at 9:49pm
|
Posted By: DogDoc
Date Posted: May 15 2022 at 9:51pm
|
Posted By: DogDoc
Date Posted: May 15 2022 at 9:54pm
|
Posted By: New2brass
Date Posted: May 16 2022 at 7:51am
|
looks to be marked 20F followed by an ordnance bomb ------------- http://www.uscarbinecal30.com/forum/club-assistance-saginaw-receivers_topic4716.html" rel="nofollow - Club Survey Saginaw Receivers |
Posted By: DogDoc
Date Posted: May 16 2022 at 8:43am
| That’s what I finally decided as well. So why is there a Saginaw stock on this Inland??? |
Posted By: Smokpole
Date Posted: May 16 2022 at 8:42pm
|
Could be any of a hundred reasons. Replaced a busted stock, got switched during a cleaning party, someone liked its looks better..... ------------- OGCA Life member NRA Life member Ashtabula Rod and Gun Life member |