Missing Markings
Printed From: The Carbine Collector's Club
Category: The Club
Forum Name: Parts Markings
Forum Description: Questions and Answers
URL: http://www.uscarbinecal30.com/forum/forum_posts.asp?TID=5553
Printed Date: Apr 24 2024 at 3:14am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Missing Markings
Posted By: painter777
Subject: Missing Markings
Date Posted: Jun 26 2021 at 7:35pm
|
Question is were these markings really missed or removed ?? Sold 6-13 to a Buyer with just 6 transactions counting this one. Inland 7,5xx,xxx Seller left buyer feedback. No feedback yet from buyer. If 'Removed' We don't need this type of 'Dealing' in this current Political Climate. Would the Serial number 'Ring a Bell' with **That Agency?** https://www.gunbroker.com/Item/901907983" rel="nofollow - https://www.gunbroker.com/Item/901907983   Edit *** To remove Agency name *** Ch-P777
------------- Living Free because of those that serve..... |
Replies:
Posted By: tenOCEE
Date Posted: Jun 26 2021 at 8:42pm
|
It's a stupid ruling on the marking of them anyway. The rule out to say to scrub it off. I say the less said, the less chance that ridiculous agency has to use against everyone. Better to ask Dan to have this thread deleted than to draw any attention to it Seriously. ------------- My sig: Seen an IP or S'G'? Add it to my registry. We'll check consecutives. https://grandrapids.wufoo.com/forms/zzlnt0519k86xs/" rel="nofollow - https://grandrapids.wufoo.com/forms/zzlnt0519k86xs/ |
Posted By: painter777
Date Posted: Jun 26 2021 at 11:52pm
|
My thoughts were if the buyer didn't know any better. And if this might benefit newer collectors in what to look out for. I have no problem with this being deleted if that is in the best interest of members and the Mods. Ch-P777 ------------- Living Free because of those that serve..... |
Posted By: tenOCEE
Date Posted: Jun 27 2021 at 1:05am
|
Maybe you're right on that, educating the new people. Didn't really think about that. ------------- My sig: Seen an IP or S'G'? Add it to my registry. We'll check consecutives. https://grandrapids.wufoo.com/forms/zzlnt0519k86xs/" rel="nofollow - https://grandrapids.wufoo.com/forms/zzlnt0519k86xs/ |
Posted By: Why Carbines?
Date Posted: Jun 27 2021 at 7:25am
| Yes, educating newbs is important, but if they didn't know about this particular marking rule and more precisely what an M2 carbine is and does then maybe they shouldn't be messing with carbines to begin with. Unfortunately, I've seen threads like this more than a few times over the years and why I understand the basic motivations behind them... some of the threads, much like this one, go too far in alerting the alphabet people that are the reason for posting such things to begin with. Personally, this whole post needs an immediate deletion and hopefully ones like them will never see the light of day again, but for some reason I feel it's going have a life of its own. |
Posted By: Jond41403
Date Posted: Jun 27 2021 at 9:03am
| most newbies only understand one thing, they want that rifle! Most newbies when they buy their first rifle or rifles, don't even know how to break them down to clean them much less about the stamping markings. I know from first hand experience about newbies, when my son was younger and his friends would buy rifles, they would automatically bring them to me to show them how to break them down, clean them, reassemble them and use them correctly and safely. Everybody has to start somewhere.jmo |
Posted By: New2brass
Date Posted: Jun 27 2021 at 12:07pm
|
there have been several reports of Inland carbines in the later 7 million range. There is even one pictured in "That book" the issue is that upon closer examination the receivers were welded from two halves. Some of them very hard to notice unless you are specifically looking for it. As to the code words, If they are looking they would be searching all of them and more. ------------- http://www.uscarbinecal30.com/forum/club-assistance-saginaw-receivers_topic4716.html" rel="nofollow - Club Survey Saginaw Receivers |
Posted By: painter777
Date Posted: Jun 27 2021 at 4:48pm
|
What about the Seller? The Point is this was sold and described as: Inland M1 Carbine WWII C&R Late Issue 6th Block Production 7.5MNew to carbines buyer buys from a established seller. Is a new buyer suppose to know the Serial number blocks? Seller bears no responsibility in the item, description or legality ? Look on some of the Redditt Sub Forums. Many, Many first time Mil Surp buyers. Asking some of the most 'Newb' questions you've ever read. To quote one: "I just purchased my first M1 Carbine from Midway, it's a 30-06" "Do I need special Military Ammo for my first Carbine" As far as the ABC boys I don't fear them. They've been here at my home and office before and will be again. I've actually purchased arms thru referrals from some of them. No Rant intended, I'll add no more as this is not in the interest or benefit of the Club. Ch-P777 ------------- Living Free because of those that serve..... |