Print Page | Close Window

Winchester stock/handguard

Printed From: The Carbine Collector's Club
Category: The Club
Forum Name: Parts Markings
Forum Description: Questions and Answers
URL: http://www.uscarbinecal30.com/forum/forum_posts.asp?TID=3712
Printed Date: Apr 19 2019 at 5:12pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Winchester stock/handguard
Posted By: Paul1262
Subject: Winchester stock/handguard
Date Posted: Oct 10 2018 at 10:42am
What stock and handguard marking should a Winchester serial number 653xxxx have?
I have read that the stock for a mid Winchester would be stamped WRA GHD and crossed cannon cartouche and a late Winchester stamped with only crossed cannon cartouche. Also, not sure if handguard should be two or four rivets.



Replies:
Posted By: Why Carbines?
Date Posted: Oct 10 2018 at 1:30pm
You've basically read correctly, a low wood, crossed cannons only and either a long or short barrel channel. It should also have a four rivet handguard.


Posted By: Paul1262
Date Posted: Oct 10 2018 at 1:45pm
John, Thank you. Disappointing news. Winchester with all correct parts except now appears that stock and handguard are incorrect. Purchase of correctly marked parts is probably in the $500.00 range.


Posted By: tenOCEE
Date Posted: Oct 10 2018 at 8:01pm
No. You could find one for $200 or under. Just be diligent and one will pop up on another Carbine you can buy, swap the stock and resell.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net