Parts Markings - slide stop

Print Page | Close Window

slide stop

Printed From: The Carbine Collector's Club
Category: The Club
Forum Name: Parts Markings
Forum Description: Questions and Answers
URL: http://www.uscarbinecal30.com/forum/forum_posts.asp?TID=3119
Printed Date: Apr 20 2024 at 12:34pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com

Topic: slide stop

Posted By: Lancer
Subject: slide stop
Date Posted: Oct 10 2017 at 3:48pm

were the late model slide stops with the machined notch used only on the M2 slides or were they also used on the other 6 oclock slides as well?

Replies:

Posted By: floydthecat
Date Posted: Oct 10 2017 at 4:47pm

There were two slide-stops (plunger and spring). The first issue was updated by the second issue and is interchangeable between the M1 and M2.

Posted By: New2brass
Date Posted: Oct 10 2017 at 5:25pm

I believe the type 2 pin was introduced early to mid 44. Considering this was the time frame of most contractors having their contracts terminated I would say only on Inland or Winchester. Not necessarily a M2 item, just the latest production.

Might be possible on other late production carbines.

Maybe someone can check the late COMs in newsletters to see if they show up?

-------------
http://www.uscarbinecal30.com/forum/club-assistance-saginaw-receivers_topic4716.html" rel="nofollow - Club Survey Saginaw Receivers