Ok I made the fiber optic tube and silver brazed on the post after lowering the top about 0.132". I tried to get it as centered up as i could but after brazing it was a little to the left. Anyhow i tried it and with the orifice fully forward (low) its about 4" high at 35 yds and its too much to the right so I will have to design a fixture to hold the optic tube so I can get it zeroed with everything amidships and centered up.
I do like the red aiming point on the post tho and the 2mm fiber seems to be about right. I also like the way the front sight group fits right into the orifice for very quick aquisition. I know that when I get the dot centered I will have exactly what I set out to do Chuck