Click on the image above to learn more about the M1 Carbine
|
Carbine Club Datasheet Question |
Post Reply | Page <12 |
Author | |
jackp1028
Hard Corps Joined: Jan 01 2016 Location: Cloudcroft, NM Status: Offline Points: 1273 |
Post Options
Thanks(0)
|
The reason I brought up the engineering drawings is that they often have a "Revision List" table that might record the revision change from 33 to 45 degrees showing the date that it occurred, at least on paper. BTW, I agree with sling00 that all three receivers initially shown are 33 degrees. W5USMC's Winchester is 33 degrees as well. My late Inland is 45 degrees and the difference is quite obvious compared to my early QHMC which is 33 degrees.
|
|
JackP
|
|
W5USMC
Moderator Group Joined: Apr 29 2017 Location: Missouri Status: Offline Points: 2949 |
Post Options
Thanks(0)
|
Well my underwood's cut looks pretty much the same as the others that I posted pictures of, so I guess 33 degrees. I still have 5 more to do data sheets on, so hopefully I find one where the cut is obviously different. If so, I will post the pic.
|
|
Wayne
USMC Retired NRA Life Member |
|
m1a1fan
Hard Corps Got Para? Joined: Jan 01 2016 Location: Virginia Status: Offline Points: 1736 |
Post Options
Thanks(0)
|
Never really paid attention to the degree or the extra cut as shown. Probably need to go back and look again.
|
|
NewScotlander
Grunt Advanced Collector Joined: Jan 02 2016 Location: New York Status: Offline Points: 682 |
Post Options
Thanks(0)
|
I just want to interject that the change, for Inland carbines, from the 33 degree cam angle to the 45 degree cam angle and the elimination of the "extra cut" took place in the second serial number block between serial number 3,055,010 and 3,078,735. If someone has a carbine between those two serial numbers and could provide data on this subject, it would be appreciated.
|
|
Post Reply | Page <12 |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You can vote in polls in this forum |