Click on the image above to learn more about the M1 Carbine
|
New to me Inland 1945 |
Post Reply | Page 12> |
Author | |
Hardknocks
Recruit Joined: Sep 29 2018 Location: South florida Status: Offline Points: 14 |
Post Options
Thanks(0)
Posted: Feb 22 2019 at 7:11pm |
Hi all
I checked the headspace and it is fine. Finally ran 75 rounds down range. 25 yards pretty impressive groups. How about the stamp on the stock I didn't get any opinions. Thanks again for all the information. Regards Mike |
|
Hardknocks
Recruit Joined: Sep 29 2018 Location: South florida Status: Offline Points: 14 |
Post Options
Thanks(0)
|
Hello Folks
to add to the story. I was cleaning up the wood and I found what looks like the cartouche I'm pretty sure this is where its supposed to be. i have read alot on uscarbine30.com and im not sure this carbine would have been originally issued with this stock. (I know the two rivet handguard is incorrect) it seems to me with my limited experience this carbine was not rebuilt, it was shot but i dont see alot of wear. looks like it has all the correctly labeled inland parts. I guess someone could have cobbled the parts to make it correct, I didn't buy the story but there was one. the carbine sat in a foot locker that was not opened for 40 years? who knows! i guess there is no way to be sure of its history. well ammo is on the way so soon i will see how it shoots. i see prices all over but i feel like i did OK for what i paid. thanks again Mike |
|
Paul1262
Grunt Joined: Jun 25 2018 Location: North Carolina Status: Offline Points: 151 |
Post Options
Thanks(0)
|
Dan, I really appreciate the level of detail contained in each of your responses.
|
|
New2brass
Moderator Group Dan Pinto, Photo Editor Joined: Nov 29 2015 Location: CT Status: Offline Points: 4661 |
Post Options
Thanks(1)
|
P in circle and CC are two different things. There were stamped P in circle which was very specific in size and style that was used by a few manufacturers early on. The crossed cannons were ordnance acceptance stamps when they were manufactured. The exception to crossed cannons would be those seen on SA rebuilds as SA had a CC stamp. Another exception there is not enough evidence of is the small cc discussed in other threads on the P-U, P-J, and large J marked stocks. There were many stateside arsenals that did rebuilds. The arsenals were government run, many with civilian workers. Think of the CC as "Kilroy was here". It was a form of accounting. It marked the carbines that were now government property. Lightly and loosely: If you stole a carbine from the factory you would be guilty of local theft. If you stole one with the CC it would be a federal crime as you now stole from the government. Edit To Add: Inland, Winchester, Underwood, IP/S'G' were the only ones to have the P in a circle on the bottom of the grip. This was early on and dropped mid 43. If you have the P in circle on any other stock used by another manufacturer then it would surely be from a rebuild (or humpestry) |
|
Paul1262
Grunt Joined: Jun 25 2018 Location: North Carolina Status: Offline Points: 151 |
Post Options
Thanks(0)
|
Dan, Thanks for the reference. Does the encircled P on the front of the hand grip indicate that it was a rebuild inspected by Ordnance? Essentially, the same meaning as cross cannons on an original carbine?
|
|
New2brass
Moderator Group Dan Pinto, Photo Editor Joined: Nov 29 2015 Location: CT Status: Offline Points: 4661 |
Post Options
Thanks(0)
|
Paul,
Why don't you start here. scroll down to stock marks and read to end of the page. After that read this page on rebuilds And then we can go from there. Best, Dan
|
|
Paul1262
Grunt Joined: Jun 25 2018 Location: North Carolina Status: Offline Points: 151 |
Post Options
Thanks(0)
|
Dan, Did the government stamp rebuild carbines with the cross cannons prior to being redistributed to military units?
|
|
Hardknocks
Recruit Joined: Sep 29 2018 Location: South florida Status: Offline Points: 14 |
Post Options
Thanks(0)
|
Hi all
Thanks for all the good information. Mike |
|
W5USMC
Moderator Group Joined: Apr 29 2017 Location: Missouri Status: Offline Points: 2959 |
Post Options
Thanks(0)
|
Hardknocks your oiler is marked IS for International Silver not SI. As far as your Magazine Pouch (Pocket) goes and I could be wrong, but it looks real to me. |
|
Wayne
USMC Retired NRA Life Member |
|
New2brass
Moderator Group Dan Pinto, Photo Editor Joined: Nov 29 2015 Location: CT Status: Offline Points: 4661 |
Post Options
Thanks(1)
|
Paul, You misunderstand what I wrote. the CC was applied at the factory when the government accepted the carbine. These carbines later may have undergone a rebuild where the stocks were sanded. Just because the CC was removed did not change the fact that it was owned by the government. The CC meant nothing to the rebuild. If stateside the rebuild arsenal would put their mark on it. Some stocks had many marks of the rebuild but you can still see the CC. Wartime replacement spare stocks would not have the ordnance stamp (ownership) and would be used for field replacement for a broken or damaged stock. |
|
Paul1262
Grunt Joined: Jun 25 2018 Location: North Carolina Status: Offline Points: 151 |
Post Options
Thanks(0)
|
I learn something every time a sign in. I did not realize that a rebuild carbine with no crossed cannons on the stock indicated that it was never accepted by the military or owned by the government.
|
|
New2brass
Moderator Group Dan Pinto, Photo Editor Joined: Nov 29 2015 Location: CT Status: Offline Points: 4661 |
Post Options
Thanks(0)
|
Mike, Nice RI late sear!
The FI trigger I forget if earlier or later. made by Reflector Hardware and think they were also marked R.H.I. or something to that effect. All carbines accepted by the military had the CC. It was proof of government ownership. If a stock was replaced it would not have the CC. If rebuilt or owner sanded the CC might be gone. Good stuff, Thanks for sharing!
|
|
Hardknocks
Recruit Joined: Sep 29 2018 Location: South florida Status: Offline Points: 14 |
Post Options
Thanks(0)
|
Hi all
took it apart to clean, more matching parts i believe. from what i read this is somewhat unusual all the matching parts, or someone put it together. anyhoo i am happy with the M1. from the info I can gather from searching it looks like the stock is from a earlier inland.? I also read not all stocks had the cartouche. thanks Mike |
|
Hardknocks
Recruit Joined: Sep 29 2018 Location: South florida Status: Offline Points: 14 |
Post Options
Thanks(0)
|
Hello all
the oiler is marked SI so that's another good thing. the 1 on the M1 receiver ring stamp does not line up with the M as GotSnlB28 mentioned. whats the opinion on the magazine pouch? repop? thanks again Mike |
|
GotSnlB28
Hard Corps Joined: Jan 01 2016 Location: WI Status: Offline Points: 896 |
Post Options
Thanks(0)
|
Some were not rebuilt. You'll see more of these late serial rifles in original condition (or with a larger % of original parts) as they had the latest parts. I generally go by finish and wear patterns, rebuild/acceptance marks, and comparison against other rifles I know or have good reason to believe are original. Also collectors "correct". |
|
Hardknocks
Recruit Joined: Sep 29 2018 Location: South florida Status: Offline Points: 14 |
Post Options
Thanks(0)
|
Hello all
From what I have read all the carbines were rebuilt so how come this one has mostly inland parts? Any way to tell? Thanks Mike |
|
GotSnlB28
Hard Corps Joined: Jan 01 2016 Location: WI Status: Offline Points: 896 |
Post Options
Thanks(0)
|
That is a nice looking late inland. I have seen those double stamped AI barrel bands before on rifles in this serial range. Interesting it has the type 6 housing. If you pull the slide back, you should find a handstamped '1' on the receiver ring, usually lower right of the M.
I always check the headspace to be certain. But fortunately I have never had one that didn't pass. More than likely, you'd be fine. |
|
Hardknocks
Recruit Joined: Sep 29 2018 Location: South florida Status: Offline Points: 14 |
Post Options
Thanks(0)
|
Being new to the carbine it seemed good to have mostly inland parts, can't really see a acceptance stamp on the stock.
Would I be safe to shoot this or do I need to get the headspace checked? I gave $1,150.00 Thanks for taking the time. |
|
W5USMC
Moderator Group Joined: Apr 29 2017 Location: Missouri Status: Offline Points: 2959 |
Post Options
Thanks(0)
|
That does look to be the spot where the hinged top strap of a recoil check or flash hider could have been. |
|
Wayne
USMC Retired NRA Life Member |
|
Why Carbines?
Hard Corps Joined: Dec 27 2015 Location: Tennessee Status: Offline Points: 883 |
Post Options
Thanks(0)
|
Mike, there are times where the term purists is used as a four letter word. Pricing on such late Inland and WRA carbines can be very subjective to lots of factors. Most guys want early flip sights, type one bands and dogleg hammers, on the other hand the later carbines are often in the best condition...it just depends on a particular buyer. |
|
Post Reply | Page 12> |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You can vote in polls in this forum |